Water-borne Paints and Coatings

Given the very wide range of coatings technology available to the paint formulator today, we can only provide a very simple overview of the best products we have to offer.

Daylight Fluorescent pigments are used in final-coat or top-coat applications but offer very little opacity (hiding power). For this reason they must be applied over a white base coat to achieve the necessary brilliance. It is also good practice to overcoat a daylight fluorescent topcoat with a clear varnish to afford protection and improve some UV resistance. 

The selection of pigment type is dependent on the type of binder system used. Thermoplastic Daylight Fluorescent pigments offer the brightest colours but are only suitable for water based systems and those containing mild solvents.

For water-based paints our A Series provides very bright, clean colours and is resistant to attack from most those co-solvents found in water-based coatings. If a higher strength pigment is more appropriate, or a smaller particle size required, then our T Series is an alternative option. Formaldehyde-free HSP Series can be used in some applications.

Slide 1
Slide 2

Applicable Products

A Series

T Series

HSP Series